Introduction
← TRAKsi Tech Support: start here
The DiDac file is a .7z bundle of the control’s log files. TRAK Engineering uses it to debug faults. Making it takes about 5 minutes.
Other TRAKsi Tech Support guides: Software Version · Screenshot · Alarm Log · Archive · Button-Press Log · ATC Magazine
-
-
Plug a USB stick into the USB port on the right edge of the pendant.
-
Press [Diagnostics] (triangle on the left) → [Alarm log] → [Save log].
-
This puts the latest alarm log in the diagnostic file. The same step, with photos, is in Saving Alarm Log.
-
-
-
Go to [Setup] (wrench icon on the left) → [System data] (bottom row of softkeys).
-
Press [Side Screen] to open the on-screen keypad.
-
On the keypad, hold [CTRL] and [ALT], then press [D].
-
The control copies its log files to the USB stick. This takes about 1 to 2 minutes.
-
Check the USB stick for a file ending in .7z. That is the diagnostic ZIP file.
-
Send it to TRAK with the other items on the TRAKsi Tech Support page.
-