How to Replace Y-Axis Waycovers (DPMRX7)

Written By: Randy Sanchez (and one other contributor)
  • Comments: 0
  • Favorites: 0

Difficulty

Difficult

Steps

2

Time Required

Suggest a time??

Sections

1

  1. Remove end tables, limit switches and electronic handwheels. Disassemble Y-axis drivetrain and remove ballscrew (yoke is mounted underneath saddle). Disconnect X-axis motor cables from motor. Remove Y-axis gibs and brackets and limit switch.

    • Remove end tables, limit switches and electronic handwheels.

    • Disassemble Y-axis drivetrain and remove ballscrew (yoke is mounted underneath saddle). Disconnect X-axis motor cables from motor.

    • Remove Y-axis gibs and brackets and limit switch.

  2. Remove main oil line that supplies saddle and table.

    • Remove main oil line that supplies saddle and table.

    • If machine has glass scales, Y-axis reader head bracket will have to be removed.

    • Forklift is recommended for lifting table/saddle. If not lifting machine too high, you may be able to leave the X-axis scale in place.

Finish Line

Author

with 1 other contributor

Randy Sanchez

Member since: 07/24/2018

11 Guides authored

Team

Siemens Internal Member of Siemens Internal

50 Members

28 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 2

All Time: 83