-
-
The purpose of the cabinet chiller (radiator) is to cool the electrical cabinet and internal components. There are two units, one on each electrical cabinet door.
-
The units are powered by single phase 220VAC and are protected by fuses F14 & F15, which also protect the enclosure fan, resistor fans and oil cooler fans.
-
There is a small tab at bottom of filter to remove. The filter media should be cleaned on a weekly basis with either an air gun or soapy water.
-
A quick check to ensure fans are operating is to place a piece of paper against fan from outside, the fan should pull the paper toward the fan.
-
Cancel: I did not complete this guide.
One other person completed this guide.
Team
