How It Works: Door Side Safety Strips

Written By: Randy Sanchez (and one other contributor)
  • Comments: 0
  • Favorites: 0

Difficulty

Very easy

Steps

1

Time Required

Suggest a time??

Sections

1

  1. The purpose of the door pressure strips is to create an e-stop condition when either the left or right side pressure switch is activated. The objective is to keep the operator safe as the door travels (when engaged with saddle) the length of the machine. When the pressure switch is pressed, you will receive a Fault 261 (E-stop). When it is released, the machine will still be in a fault state, but the message will disappear. This can be misleading, the machine is still in an E-stop state and the servos still need to be RESET. When the pressure switch is pressed, you will receive a Fault 261 (E-stop). When it is released, the machine will still be in a fault state, but the message will disappear. This can be misleading, the machine is still in an E-stop state and the servos still need to be RESET.

    • The purpose of the door pressure strips is to create an e-stop condition when either the left or right side pressure switch is activated. The objective is to keep the operator safe as the door travels (when engaged with saddle) the length of the machine.

    • When the pressure switch is pressed, you will receive a Fault 261 (E-stop). When it is released, the machine will still be in a fault state, but the message will disappear. This can be misleading, the machine is still in an E-stop state and the servos still need to be RESET.

Finish Line

Author

with 1 other contributor

Randy Sanchez

Member since: 07/24/2018

11 Guides authored

Team

Siemens Internal Member of Siemens Internal

50 Members

28 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 93