Skip to main content
  1. Prior to replacing a part, power to machine must be OFF! Remove the screws that hold the work lamp to the machine. Loosen the liquid tight fitting. Remove the 3 screws from both ends of the light.
    • Prior to replacing a part, power to machine must be OFF!

    • Remove the screws that hold the work lamp to the machine.

    • Loosen the liquid tight fitting. Remove the 3 screws from both ends of the light.

    • Remove the black cover and pull the bulb out of the glass cover

    • Remove the plastic lamp cover.

    • Remove the GRN, WHT & GND wires.

    • Install the replacement light.

    • Perform steps in reverse order.

Finish Line

Fataimoemanu Tohi

Member since: 02/11/2020

12 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 2

All Time: 69