Skip to main content
  1. Shut off power to machine. On the rear of the machine, locate the solenoid to be replaced. Remove the screw from the plastic case.
    • Shut off power to machine.

    • On the rear of the machine, locate the solenoid to be replaced. Remove the screw from the plastic case.

    • Loosen the liquid tight fitting.

    • Remove the plastic casing.

    • Remove the screws that hold the RED (24VDC) and WHT (0VDC) wire in the slots.

    • Remove the solenoid and install the replacement.

    • Perform steps in reverse order.

Finish Line

Fataimoemanu Tohi

Member since: 02/11/2020

12 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 4

All Time: 91