TMC - How to Replace ATC Tool Gripper

Written By: Fataimoemanu Tohi (and 2 other contributors)
  • Comments: 0
  • Favorites: 0

Difficulty

Easy

Steps

1

Time Required

00:05:00 - 00:10:00

Sections

1

  1. Unbolt the two screws on the top side of the ATC tool gripper. Remove the T-shaped metal plate.

    • Unbolt the two screws on the top side of the ATC tool gripper.

    • Remove the T-shaped metal plate.

    • Remove the ATC tool gripper upward.

    • Note the orientation of the ATC tool gripper.

    • Install the replacement part.

    • Perform steps in reverse order.

Finish Line

Author

with 2 other contributors

Fataimoemanu Tohi

Member since: 02/11/2020

12 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 5

All Time: 156