Skip to main content
  1. Unbolt the two screws on the top side of the ATC tool gripper. Remove the T-shaped metal plate.
    • Unbolt the two screws on the top side of the ATC tool gripper.

    • Remove the T-shaped metal plate.

    • Remove the ATC tool gripper upward.

    • Note the orientation of the ATC tool gripper.

    • Install the replacement part.

    • Perform steps in reverse order.

Finish Line

Fataimoemanu Tohi

Member since: 02/11/2020

12 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 151