RX - How to Replace an RX Pendant

Written By: Dozuki System (and 5 other contributors)
  • Comments: 0
  • Favorites: 0

Difficulty

Easy

Steps

1

Time Required

00:30:00 - 00:45:00

Sections

1

  1. Turn off power to the machine.

    • Turn off power to the machine.

    • Unplug all the connectors on the pendant arm/pendant platform side of the pendant.

    • Remove the pendant from the pendant arm by removing the (4) M6-1.0x25 25B screws that secure it in place.

    • All RX Pendants (mill/lathe) utilize the same mounting screws.

    • Mount the replacement pendant on the arm/platform with the (4) mounting screws.

    • Reconnect all the previously removed cable connections.

    • Either reload old configuration file using service code 141 or recalibrate and enter new backlash calibration constants.

Finish Line

Author

with 5 other contributors

Dozuki System

Member since: 09/24/2009

14 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 5

All Time: 106