Skip to main content
  1. Shut power off to machine. Unplug all cables from computer module and remove machine ID key.
    • Shut power off to machine.

    • Unplug all cables from computer module and remove machine ID key.

    • Computer Module connection points on your machine may differ from picture based on options installed.

    • Remove top (3) SHCS, serrated & flat washers. Loosen bottom (3) SHCS, serrated & flat washers. Remove Computer Module.

    • Install new Computer Module, perform previous steps in reverse order.

    • Turn power on to machine, verify computer module boots up. Check axis and options functionality.

  2. Shut power off to machine. Unplug all cables from computer module and remove machine ID key.
    • Shut power off to machine.

    • Unplug all cables from computer module and remove machine ID key.

    • Computer Module connection points on your machine may differ from picture based on options installed.

    • Remove top (3) SHCS, serrated & flat washers. Loosen bottom (3) SHCS, serrated & flat washers. Remove Computer Module.

    • Install new Computer Module, perform previous steps in reverse order.

    • Turn power on to machine, verify computer module boots up. Check axis and options functionality.

Finish Line

One other person completed this guide.

Dozuki System

Member since: 09/24/2009

14 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 163