Load License File

Go to [Setup] (wrench icon on the left), then select [Set Password].

Enter the Manufacturer Password: TRAKmt2021 and press [OK].

Plug the USB drive containing the .zip license file into the right-side USB port on the pendant.

There is no need to unzip the file — load it onto the USB exactly as received.

Go to [Setup] → [Page 2] → [License]

Press [Read in license key] on the vertical softkey menu.

Use the file browser to select your USB drive and navigate to the .zip license file.

Select the file and press [OK] to install.

Press [Reset (po)] to soft reboot the control.

To confirm, go to [All Options], find the newly acquired license, and verify that both the Set and Licensed columns have their corresponding checkboxes marked.