Skip to main content
  1. Use UP/DOWN arrow keys until you find the "Mon" (monitor), then press ENTER. Use SIDE arrow key to highlight "U1", then use UP/DOWN arrow keys to toggle to "U3" and press enter. You will now see U3-01, press enter to display the last registered fault.
    • Use UP/DOWN arrow keys until you find the "Mon" (monitor), then press ENTER.

    • Use SIDE arrow key to highlight "U1", then use UP/DOWN arrow keys to toggle to "U3" and press enter.

    • You will now see U3-01, press enter to display the last registered fault.

    • You can view the last 10 faults recorded by the AC drive.

    • Complete Yaskawa AC Drive V1000 Quick Start manual is available at the end of this guide, including Section 5.2 Fault Detection and Section 5.3 Alarm Detection in PDF format.

Finish Line

3 other people completed this guide.

Dozuki System

Member since: 09/24/2009

14 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 23

Past 30 Days: 114

All Time: 4,434