Skip to main content

Introduction

← TRAKsi Tech Support: start here

The DiDac file is a .7z bundle of the control’s log files. TRAK Engineering uses it to debug faults. Making it takes about 5 minutes.

Other TRAKsi Tech Support guides: Software Version · Screenshot · Alarm Log · Archive · Button-Press Log · ATC Magazine

  1. Plug a USB stick into the USB port on the right edge of the pendant.
    • Plug a USB stick into the USB port on the right edge of the pendant.

    • Press [Diagnostics] (triangle on the left) → [Alarm log] → [Save log].

    • This puts the latest alarm log in the diagnostic file. The same step, with photos, is in Saving Alarm Log.

  2. Go to [Setup] (wrench icon on the left) → [System data] (bottom row of softkeys). Press [Side Screen] to open the on-screen keypad.
    • Go to [Setup] (wrench icon on the left) → [System data] (bottom row of softkeys).

    • Press [Side Screen] to open the on-screen keypad.

    • On the keypad, hold [CTRL] and [ALT], then press [D].

    • The control copies its log files to the USB stick. This takes about 1 to 2 minutes.

    • Check the USB stick for a file ending in .7z. That is the diagnostic ZIP file.

    • Send it to TRAK with the other items on the TRAKsi Tech Support page.

Finish Line

Ryan Levrini

Member since: 6/10/24

37 Guides authored

Team

Siemens Internal Member of Siemens Internal

56 Members

68 Guides authored

0 Comments

Add Comment



View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 319