3D Printing - How to Download, Install, & Register for the KISSlicer Slicing Software

Written By: Pat Fitzsimmons (and one other contributor)
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

2

Time Required

00:15:00

Sections

1

Introduction

This guide details how to download, install, and register for the KISSlicer Slicing Software for the 3ntr 3D Printers.

  1. The following section applies for downloading, installing, and registering for the KISSlicer software for 3ntr's A2v4 and A4v4 3D Printers. You must have access to the KISSlicer License/Product Key before proceeding with the next steps.

    • The following section applies for downloading, installing, and registering for the KISSlicer software for 3ntr's A2v4 and A4v4 3D Printers.

    • You must have access to the KISSlicer License/Product Key before proceeding with the next steps.

    • In order to receive the abovementioned License/Product Key, please make a request to the following email address: additivemanufacturing@trakmt.com.

    • A TRAK Machine Tools Representative will make a request to Plural for the License/Product Key. With a one (1) day lead time, Plural will send our company the License/Product Key in the form of a Notepad file. Please note that Plural requires a one (1) day lead time for KIS and SSI licenses.

    • In an email, a TRAK Machine Tools Representative will send the Notepad file, as well as this Dozuki procedure. This email will also include a Box site where the KISSlicer installation files can be downloaded from.

    • Make sure to download all applicable installation files from the Box site provided, as well as the Notepad file. All components are needed in order to install the KISSlicer program.

    • Once all applicable files are downloaded into your computer, paste and store the License/Product Key Notepad file into the same folder that your KISSlicer installation files are in.

    • Begin the registration process by clicking on the KISSlicer64 file. The KISSlicer program should start.

  2. If KISSlicer program recognizes the license key, it will be automatically applied when the program opens. If the License/Product Key does not automatically work as stated above, manually apply it to the KISSlicer program by going to Menu, then File, then Change Registration Key. The Registration Key Dialogue Box will appear. Open the Product/License Key Notepad file, and copy the actual Product/License Key that is in the file. Paste the Product/License Key into the Registration Key Dialogue Box, and click "OK."

    • If KISSlicer program recognizes the license key, it will be automatically applied when the program opens.

    • If the License/Product Key does not automatically work as stated above, manually apply it to the KISSlicer program by going to Menu, then File, then Change Registration Key.

    • The Registration Key Dialogue Box will appear. Open the Product/License Key Notepad file, and copy the actual Product/License Key that is in the file. Paste the Product/License Key into the Registration Key Dialogue Box, and click "OK."

    • Once KISSlicer is successfully registered, the title bar will show the License/Product Key, as shown on the image.

Finish Line

Author

with 1 other contributor

Pat Fitzsimmons

Member since: 03/01/2021

25 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 14

All Time: 144